Get the same listed 4.6kWh usable energy as the 5.12kWh Pro in a different enclosure and warranty option. The Lite supports compatible 48V-class systems, wall or floor mounting, and a 70A maximum charge limit. Choose after checking recharge needs and mounting space.
Choose backup around your real load
List the appliances you need during an outage, add their running watts, and check motor starting demand separately. Prioritising essential circuits helps stored energy last longer. Compare usable energy, voltage and recharge requirements before comparing price.
Model-specific specifications
| Manufacturer model | CSE-ESS(L)-51.2V100AH |
|---|---|
| Series | Elektra Boost Lite |
| Rated energy | 5.12kWh |
| Usable energy | 4.6kWh, battery cell side; AC delivery is lower |
| Nominal voltage | 51.2V |
| Rated capacity | 100Ah |
| Chemistry | LFP / LiFePO4 |
| Recommended charge/discharge current | 50A |
| Maximum charging current | 70A, subject to conditions and derating |
| Maximum discharging current | 100A, subject to conditions and derating |
| Communication / monitoring | RS485 / RS232 / CAN |
| Cycle life (manufacturer test) | >6000 cycles at 25°C |
| Ingress protection | IP20, current datasheet |
| Mounting | Wall mount / floor stand |
| Weight | 45kg |
| Dimensions | 454 × 585 × 135mm (W × H × D) |
| Charging temperature | 0°C to +55°C |
| Discharging temperature | −20°C to +55°C |
Values above follow the manufacturer datasheet downloaded on 6 October 2026. Battery-side current ratings are not guaranteed AC output. Cycle counts are test results, not a fixed calendar lifespan.
Questions before you buy
How long will this Crown battery run my appliances?
At a constant 500W appliance load, an illustrative estimate is about 8.0 hours. This assumes 4.6kWh DC energy available, 90% inverter efficiency, 20W inverter idle draw, a charged healthy battery, and no incoming solar. The listed usable energy already includes the manufacturer discharge window, so it is not reduced a second time. Temperature, ageing, reserve settings and varying appliance demand change the result.
Will it work with my existing inverter?
51.2V nominal battery voltage must match the inverter battery platform. Matching CAN or RS485 ports alone does not establish compatibility. Confirm the supported BMS protocol, firmware and charge/discharge settings for both exact models. The inverter continuous and starting-load limits also apply.
Is kWh the same as kW?
No. kWh measures stored energy and helps estimate backup time. kW measures power at one time. A battery energy figure does not establish the inverter output or guarantee that an air conditioner can start.
What is the warranty?
5-year replacement warranty, confirmed by Al Arab Solar. Applicable registration, covered-fault conditions and supplied-unit written terms apply. Keep your invoice and warranty card.
Can I install it outdoors?
The current datasheet lists IP20. Use a protected indoor position and follow the installation manual. It is not a rainproof enclosure.
Get the right battery for your system
Send Al Arab Solar your inverter model, essential appliance list and target backup hours. Request the final PKR price, actual availability, included accessories, delivery cost and installation scope before ordering. Keep the purchase invoice and complete the applicable warranty registration.
Technical reference: Crown Solar Energy datasheet and official model page.





Reviews
There are no reviews yet.